How do I change my Linksys router settings?

Linksys router configuration allows you to change the Linksys router’s settings. Follow the steps
discussed here to change the settings.
Accessing the Linksys router’s web based setup page:
o Open a web browser on your computer r other wireless device connected to the Linksys
smart wifi router.
o Enter linksyssmartwifi.com in the URL bar of the web browser.
o If any error occurs, use default I address 192.168.1.1 to login into the Linksys router.
o The Login page is directed with a prompt for Linksys router login information.
o By default, the username field should be left blank.
o By default, the password has to be entered as admin.
o This would redirect you to the Linksys router’s web based setup page.
o The web based setup is the place where you can access all the route’s settings and configure
the as desired.
To cite an example; to configure the wireless settings of the Linksys smart wifi router, you must
access the web based setup page via linksyssmartwifi.com login first and click on the wireless tab
on the setup page.

Linksys router is not working after reset, how to fix this?
Troubleshoot:
Case 1 – if the Linksys router is not connecting to the internet:
You must have lost the wireless network credentials required to connect to the ISP during the
resetting of the Linksys router.
Log into the Linksys router using steps as follows;
o Open a web browser on your computer r other wireless device connected to the Linksys
smart wifi router.
o Enter linksyssmartwifi.com in the URL bar of the web browser.
o If any error occurs, use default I address 192.168.1.1 to login into the Linksys router.
o The Login page is directed with a prompt for Linksys router login information.
o By default, the username field should be left blank.
o By default, the password has to be entered as admin.
o This would redirect you to the Linksys router’s web based setup page.
o Access the wireless settings and select the manual configuration option.
o Enter the usrname and password for the wireless connection type for ISP login.
o Save the settings.
o You must now connect to the internet.
Case 2 – power LED is blinking or lightly illuminated:

o Try to power cycle your Linksys router by turning it off and disconnecting from power and
then re-plugging to the power and turning it on.
o As the Linksys router might have lost the ability to assign IP addresses to the computer after
resetting, you must assign a static IP address to the computer.
o The Linksys router’s firmware might need an update the latest version through
linksyssmartwifi.com login to the web based setup page.

What to do if my Linksys router drops internet connection?
The possible reasons to dropping if wireless signals or connection might be;
o Signal interference from other multiple wireless devices in the close vicinity of the Linksys
router.
o The wireless device connected to the Linksys smart wifi network might be receiving poor
quality wifi signals broadcasting from the Linksys router.
o The Linksys router’s firmware might be outdated.
Troubleshoot:
 Position the Linksys router away from the source of the signal interferences.
 The multiple devices connected to linksys router might cause low quality signals. Change the
default setting and assign secured password. Also, Use WPA or WPA2- personal as the
wireless connection type to enhance wireless security.
 Update the firmware of the Linksys router through linksyssmartwifi.com login to access the
web based setup page and select firmware upgrade option.