Epson has been at the printer’s production for the past so many decades. Their versions are durable, effective, and famous for exceptional performance. At precisely the exact same time, we can not deny the simple fact that printers have a reasonable share of flaws. The problems occur as a result of mechanical or technical explanations.
If you’re coming across this mistake, then this may be a bothersome problem for you and this can be all up to some extent warranted also. Fortunately, we’ve purchased a simple remedy for you. Earlier this, we would like to talk about the probable causes of the Epson WF 3640 Error Code 0x97. This error message may pop-up anytime whenever the printer has been used for an elongated period. This error code prevents the simple performance of your printer that it is meant to be utilized for.
What causes Epson Error Code 0x97?
If there is an internal hardware issue with the printer or the motherboard is malfunctioning, then this error will appear. Try the below-mentioned troubleshooting steps to fix this error code
Disconnect everything from the printer: Cancel all printing jobs and remove the paper if jammed any inside the tray. Disconnect the cables connected to the printer which includes a USB cord, power cords, and ink cartridges. Press the power button for 1 minute and plug the wires again to the printer. Try using the printer and check if the printer problem has been resolved or not.
Reset your printer: This is another method of fixing the error code. Disconnect the cables and keep the printer in the same state for 5 minutes. Continue pressing the power button for 1 minute and check if the problem has been resolved or not. If not, then go to the next troubleshooting step.
Clean print heat: Sometimes, the dirty and choked print head can be the reason behind an error 0x97 of Epson printer. To get out of this situation, clean the print head by implementing the below-mentioned techniques.
Step 1: Remove the cartridge from the print head and place the cartridge in the towel. Now, remove the print head and clean it properly.
Step 2: Use the lint-free cloth damped in warm water to clean the print head. Clean the nozzle area properly until the black ink clears properly.
Step 3: Soak the print head in the water bowl for 5 minutes. Keep the water at a normal temperature. It should not be at the boiling point. Now, place the print head on the towel and let it rest for 10-15 minutes.
Step 4: Place the print head on the top of the paper towel and allow it pat-dry for 15 minutes. Insert the print head back to its place and re-install the cartridges to their respective place. Turn on the printer and check if the error gets removed or not.
Install and update the printer’s driver: More often, malware can be another cause of this error code. To get rid of this, install and update the malware protection online using the computer browser.
If still, you‘re facing issues regarding Epson Printer Error Code 0x97 then you can contact us for help.