Those who have been using a vehicle for a long time know how confusing it can get when the need to substitute their car tyres arises. It is mainly because of two reasons. One, there is no standard size of tyres. You can find immense variety in them, both regarding their design and size. The other reason is that your car can easily adjust to more than one size of tyre.
Tyres act as the crucial link between the road and your vehicle. Proper driving becomes impossible without them. A great understanding of Mercedes Tyres Leicester can be achieved only when you can read the specifications correctly.
Tyre size – How Do You Find It?
The ideal size of the tyre is present in the manual that you get with your vehicle. In there, the manufacturer provides all the information about the tyre size. Go through the manual or handbook carefully, and you will find that you are making great tyre decisions.
Apart from that, you can also find more about your tyre size on the tyre placard. It is found most commonly inside the door jamb of the driver or the car owner. You can find the size of your tyre, and the optimal air pressure of the tyre in the placard.
Where Do You Find the Tyre Size?
Tyre size is printed on the sidewall of the tyre. The sidewall is the area that makes up the side of your vehicle’s tyre. You will find that it consists of a code system or a string of letters and numbers. By understanding it, you can drive properly and find yourself more confident about the kind of tyre that should be its replacement.
Reading Your Tyre Size
Let’s suppose the size on the sidewall of your tyre is as follows. Here is how you can interpret it.
You can break it in the following manner:
205 – It refers to the section width of your vehicle’s tyre. The width is in millimetres. Here it is 205 mm.
60 – It is the aspect profile or ratio of your tyre. The aspect ratio is the height from the tread’s base to the rim. 60 indicates a percentage of the width of the treads. The height of the tyre whose size is mentioned above is 60% of its section width. If you have a low-profile tyre or its sidewall is more shallow than usual, then the aspect ratio will be small.
R – It indicates the tyre construction. In this case, the radial-ply way of construction has been used. Radial ply is a particular tyre design where cord plies are kept perpendicular to the travel direction. Radially means from the tyre’s centre. It is the type of construction that is used in a majority of Car Tyres Leicester. Hence, you can find R written on the tyres of a majority of vehicles.
15 – It refers to the wheel rim’s diameter. This diameter is in inches. In this case, the diameter of the wheel rim is 15 inches. It means that you should buy wheels of this size for your tyres.
91 – It is a code that points to the highest load-bearing capacity of your vehicle’s tyres. Different kinds of load index represent the maximum load or weight that a tyre can handle.
V – The speed at which the tyre of your vehicle can safely function. Keep in mind that this speed is indicative of a tyre that is in optimal condition, fitted correctly, and has the appropriate inflation pressure.
Now that you are well aware of the functioning of your car tyre, make sure you keep up with its condition, and provide necessary repairs. You do not have to understand every intricacy of your vehicle’s tyre. Find the best services in your area to enhance your vehicle’s performance.